|
Underwater Admiralty
Services, Inc. Techology
| |
| Hardsuit System Specifications
|
|
| Hardsuit Specifications |
| Operating Depth |
1000 FSW |
| Primary Materials |
A356-T6 aluminum castings & 6061-T6 aluminum joints |
| Height (with no extensions) |
73" |
| Arm Span |
70" |
| Thickness (including backpack) |
30" (with arms at sides) |
| Weight in Air (suit only) |
500 lbs. |
| Standard Manipulators |
2 x Type-I; two or three jaws each |
| Ballast Weights (front) |
Up to 13; 2 to 5 lbs. each |
| Ballast Weights (rear) |
Up to 4; 10 lbs. each |
| Life-Support Endurance |
40 hours |
| Primary Communications |
Hard wired |
| Back-up Communications |
Through-water acoustic (Orcatron or equivalent) |
| Spare Penetrators |
4 x 3/4" plain bore; 3 x 4/5"
plain bore |
| Support
Stand Specifications |
| Primary Material |
2" square aluminum
tubing |
| Assembled Height (with no
waist extensions in suit) |
Suit closed: 84" --
Suit open: 91" |
| Length of Stand (maximum) |
66" with suit open |
| Width of Base |
48" |
| Assembled Weight |
70 lbs. |
| Hydraulic Cylinder Type |
NOPAK ENN-H6; 1-1/2"
bore |
| Hand Pump Type |
ENERPAC P-392; 10,000 psi |
| Basic Umbilical Specifications |
| Length |
1,200’ |
| Breaking Strength |
6,400 lbs. |
| Design Standards |
1 twisted-shielded pair
(#18 AWG)
Lloyd’s Register of Shipping |
Hardsuits
Common
Applications of the Hardsuit Technology
Hardsuit Thruster Pack Technical Information
Hardsuit Illustrated
History of Atmospheric Diving
UAS Inc. Hardsuit Image Gallery
hack
|
|
